i will teach you how to put decals or graphics on a vehicle or anything for that matter
make marks with a pencil to assure proper centering , and carefully peel back the vacuum paper behind the decal and put a crease in it so it cant rollback , do this to both ends.
next you should have the applicable squeegee used to apply them most decals will come with that , preferable a 3m i found works best.
tack the decal where you would like to place it so its tight , work left to right holding the squeegee at a slight tilt toward the right and make strokes up and down working the air toward the right . when you get to the point about 2 inches from the paper you pulled back un tack the right side of the decal and pull the paper back as you apply the decal
if your putting the decals or graphics on the doors for example you should first start by cleaning the area you are going to apply them with soap and water , then go over the area with alcohol , preparation is key
pending on weather if its too chilly you may want to use a heat gun and go over the decal to assure it will stick , poke air bubbles out with a pin . and your done , if you ever need to take them off use a heat gun get it warm and they will come off easy
评论
nеarly a yеar. You don't forget how tasty some things really are !! One can is enough to make it difficult to read all these comments!
Also visit my site :: secured loans bad Credit
it if not!
Hеre is my web page :: fast cash loan no credit check