moto after the success of mobile phone ring tones, you can modify the main Menu Transparency: connect USBnet, with the "UltraEdit-32" Open: \ system \ ezxlocal \ download \ appwrite \ skin \ default1 \ common.ini this file, modify the inside [ZFsba_1] Bg_Type_Std = 2 Bg_Stretch_Std = 0 Bg_Opacity_Std = 100 -- - This value is the main menu, transparent, 100 is not transparent, 0 is full and thoroughly revised, according to their preferences. Here are left soft key: connect USBnet, with the "UltraEdit-32" Open: \ system \ ezxlocal \ download \ appwrite \ skin \ default1 \ phone_p.ini this file, modify the inside of the [Idle] this set of data, below, note that each row has an empty set of data between the opening line, do not
moto a1000 a successful future, they can modify the main menu transparent: connect USBnet, with the "UltraEdit-32 "Open: \ system \ ezxlocal \ download \ appwrite \ skin \ default1 \ common.ini this file,
modify the inside [ZFsba_1] Bg_Type_Std = 2 Bg_Stretch_Std = 0 Bg_Opacity_Std = 100 - This value is the main menu, transparent, 100 is not transparent, 0 is full and thoroughly revised, according to their preferences. Here are left soft key: Even on the USBnet, with the "UltraEdit-32" Open: \ system \ ezxlocal \ download \ appwrite \ skin \ default1 \ phone_p.ini this file, modify the inside of the [Idle] this set of data, below, note that each group of data lines between the have an empty
open line, do not mistake, copy the following data, when the Do not copy the text into, and remember. [ZSoftKey_Left] Bg_Type_Std = 2 Bg_Type_S = 2 Bg_Stretch_Std = 5 Bg_Stretch_S = 5 Bg_Opacity_Std = 0 Bg_Opacity_S = 0 Border_Type_Std = 0 Border_Type_S = 0 Border_Width_Std = 0 Border_Width_S = 0 Padding_Left = 0 Padding_Right = 0 Padding_Top = 50 Padding_Bottom = 0 Spacing_H1 = 3 [ZSoftKey_Right] Bg_Type_Std = 2 Bg_Type_S = 2 Bg_Stretch_Std = 5 Bg_Stretch_S = 5 Bg_Opacity_Std = 0 Bg_Opacity_S = 0 Border_Type_Std = 0 Border_Type_S = 0 Border_Width_Std = 0 Border_Width_S = 0 Padding_Left = 0 Paddin g_Right = 0 Padding_Top = 50 Padding_Bottom = 0 Spacing_H1 = 3
turn - MOTO ROCK E2-related information (1) 2007-05-04 01:40 introduced the USB net: Brush must be before the "connection" is displayed inside a. Install USBLAN driver (Universal Driver) 2. phone connection mode to USB net, through the USB data cable to connect to the computer 3. the system prompted the discovery of new hardware, require the installation of drivers. The search path to point to just installed USBLAN driver 4. In the command line window, run the cmd, and type the command: ipconfig, there will be a new connection, IP for 172.XXX or 192.168.16.X, this IP
for the computer to connect the computer with the E2 assigned to the IP, E2 of the IP is the IP address of the last surface of a number plus 1. For example, in ipconfig saw the IP address: 172.16.16.5 or 192.168.16.1, then the E2's IP is 172.16.16.6 or 192.168.16.2 (following the use of this IP) 5. Then, there are two ways to access the system files E2 A: In the command line, type telnet 172.16.16.6 or telnet 172.16.16.6 login prompt appears, enter the root carriage return on the telnet login to the E2 system
inside the. E2 is a linux system, so the use of linux shell commands action inside. For example, ls-Al are listed in the current directory, all files B: direct use explorer to visit. In the windows of the explorer's address bar type \ \ 172.16.16.6 \ system or \ \ 192.168.16.2 \ system this way, the same as with the usual access to Network Neighborhood, you can see content seen the same with telnet. Just that some shell commands can not be implemented. If you are prompted to \ \ 192.168.16.2 \ system
can not be found or access is not enough. Then, restart the E2. To re-connect to the computer. A landing to use, and then use B to open [url = file: / / \ \ 192.168.16.2 \ system] \ \ 192.168.16.2 \ system [/ url]
评论